P.O. Box 628; Cibolo, Texas 78108
ShotGard® Bullet Resistant Products
|
ShotGard® Bullet Resistant Products |
|
|
ShotgardÒ Fiberglass Armor Specification - use your browser print option.PART I -GENERAL1.1 Location: This specification covers the requirements for bullet-resistant fiberglass to be located as shown on the construction drawings or as noted in the finish trades schedule. 1.2 Shop Drawings: Shop drawings shall be submitted for approval prior to the fabrication or purchase of material and include plan view, elevations, sections, and details of the proposed installation including attachment methods. 1.3 Certification shall be furnished indicating that all materials have been tested in accordance with the appropriate test procedure. PART II- PRODUCTS2.1 Manufacturers: A. North American Bullet Proof, Inc. Cibolo, TX, (v) 888-746-8427 (f) 210-225-09842.2 Materials: A. Bullet Resistant Fiberglass 1. Model: (Specify BB-A, 1, 2/6, 3, 4/5, 7, 8 (from ballistic chart) 2. Performance Level: (Match with model Level 1 - Level 8) 3. SHOTGARD® to be constructed of a multi-ply ballistic fiberglass laminate produced from ballistic fiberglass and impregnated with a thermostat polyester resin binder. The multi-ply configuration is to provide a delaminating effect when ballistically attacked. 4. Nominal Thickness: (Match with model 1/8" thru 1-3/8") 5. Nominal Weight per sq. Ft.: (Match with model 1.2 thru 13.6 lbs.) 6. Testing by Underwriters Laboratories (listed product with UL 752 Label) or H.P. White Laboratories (non listed product) PART III-EXECUTION 3.1 Examination A. Prior to commencing installation, examine all areas to receive bullet resistant material. 3.2 Installation A. Install components in accordance with manufacturers instructions and drawings. 3.3 Cleaning A. After installation, clean surfaces and touch up any damaged areas.
|
|
If you have an immediate need or
would like to discuss any of our ShotGard® Bullet Products call toll free at
(888)746-8427
|